WIS Document: 16939
Model Context: 900 (1996)
| |
Interior lighting
|
The car's interior lighting is controlled by the ICE
control module which grounds the roof lamps, reading lamps and switch.
The interior lighting is supplied with +30 voltage via fuse 4.
The interior lighting is switched on when a door is opened, causing the door switch to
close and ground pin 44 (driver's door) or pin 67 (passenger doors) of the ICE control
module.
The ICE grounds the lamps according to the position of the switch:
Position 1:
(front position) Both roof lamps on
regardless of the ignition switch position or whether the ignition key is inserted or not,
irrespective of the position of the door.
Position 2:
(middle position) Both roof lamps come on
when a door is opened or the key is removed from the ignition switch. (Remain on as long as
the door is open or for a maximum of 20 seconds if the door is closed. The interior lighting
then dims.)
Position 3:
(rear position) Only the rear roof lamp comes
on regardless of the ignition switch position or whether the ignition key is inserted or not,
irrespective of the position of the door.
The ICE control module also controls the timing of the interior lighting.
Reading lamps
The reading lamps can always be operated, regardless of the position of the switch or
the position of the ignition switch and whether the doors are open or closed.
Canonical Workshop Redirect
For step-by-step instructions, interactive illustrations, and official wiring diagrams, refer to the human-optimized workshop page below.
Switch to Interactive WIS