WIS Document: 280

| | Pre-delivery service | | 1. | Washer fluid, top up. | | 2. | Insert main fuse No. 1 in the main fuse box. | | 3. | Program the anti-theft alarm. Affix anti-theft alarm labels. | | 4. | OBD II specification cars: connect an ISAT scan tool and clear any diagnostic trouble codes in the engine and automatic transmission management systems. | | 5. | Saab Information Display: set the clock, program the SID. | | 6. | Program the ACC and radio anti-theft code. | | 7. | Check operation of wash-wipe systems. | | 8. | Tyre pressures, check and adjust. | | 9. | Wheel bolts, tighten with prescribed torque. | | 10. | Check oil and fluid levels, inspect for leaks, top up. Engine, automatic transmission and power steering. | | 11. | Check coolant and fluid level, inspect for leaks, top up as necessary. Cooling system, brake and clutch systems. | | 12. | Turbo: Plug the electric lead into the boost pressure control valve. | | 13. | Raise the car and inspect the underbody for transit damage. Note that the corrosion protection (underseal) should also be intact. | Important | Do not jack up the rear end of the car or the rear axle. | | | 14. | Brake disc transit protection, remove. | | 15. | Retighten the rear axle mounting. | | 16. | Fit the cover panel in the spoiler. Put the tools in place and fit the supplied equipment. | | 17. | Cars for the European market, M1997: Certificate of Conformity". | | 18. | Road test | | 19. | . OBD II specification car: Connect an ISAT scan tool and check that no new diagnostic trouble codes have been detected in the engine and automatic transmission management systems after the road test. | | 20. | Cleaning