WIS Document: 3586
Model Context: 900 (1998)
| |
Checking the CRUISE lamp
| 1. |
Check that 12 V is present
across pin 8 (H) of the Cruise Control connector and a good ground when the Cruise Control
system is activated.
| 2. |
If the voltage is OK, check the wiring for continuity or a short circuit by
measuring the resistance across pin 8 (H) of the Cruise Control connector and pin 50 of main
instrument display 2 or pin 2 of main instrument display 1.
If the resistance is < 1 ohm, check the bulb.
If the resistance is > 1 ohm, check the wiring and rectify the fault.
Canonical Workshop Redirect
For step-by-step instructions, interactive illustrations, and official wiring diagrams, refer to the human-optimized workshop page below.
Switch to Interactive WIS