WIS Document: 372
Model Context: 900 (1998)
| |
Fluid level, automatic transmission
Start the engine and run it at idling speed. Engage D and wait at least 15 seconds. Then engage R and wait another 15 seconds. Repeat in position P.
Check the fluid level (engine running at idling speed and selector lever in P). Top up as necessary.
Pay attention to the appearance and odour of the oil. If it is turbid or discoloured and/or smells burnt, an oil change is advisable even if there is no noticeably poorer shifting performance or excessive noise.
| Important
|
The dipstick has two sets of level marks. The amount of fluid between the maximum and minimum marks is about 0.4 litres (0.4 qts).
|
Grade of oil:
DEXRON III automatic transmission oil (mineral oil based).
Canonical Workshop Redirect
For step-by-step instructions, interactive illustrations, and official wiring diagrams, refer to the human-optimized workshop page below.
Switch to Interactive WIS