WIS Document: 3975

| | Direction indicators | Direction indicators All the direction indicators on the car are used when the light alarm is set off and also as a confirmation when a button is pressed on the remote control. It is possible to program whether the direction indicators are included in the alarm and what the flash time should be. The configuration of the light confirmation is also programmable. The direction indicators are connected to the control module (pin 12/ right-hand and pin 24/left-hand). The outputs are protected from shorting and if the control module detects a short circuit they will be disconnected automatically from the alarm system and only an acoustic alarm will be set off if the alarm is triggered. The direction indicator outputs will be reconnected next time the alarm is armed. Anti-theft alarm with VSS The direction indicators are supplied with power separately from +30 to pin 22 of the control module. In the event of a short circuit the fuse will blow but the direction indicator function will still be intact.