WIS Document: 4893

| | Checking the transmission fluid level Checking and topping up the transmission fluid should be carried out in accordance with the service schedule. The level of the fluid can be checked in the following manner: | 1. | Position the car on a level surface and apply the handbrake. When checking the fluid level the transmission should be warmed up to normal operating temperature (approx. + 80°C), which it will attain after driving for about 20 km. Check the fluid temperature using the diagnostic tool. | 2. | Run the engine at idling speed, engage position D and wait at least 15 seconds. Then engage R and wait 15 seconds. Do the same in position P. | 3. | Wipe the dipstick clean with a lint-free cloth and put it back in the gearbox. | 4. | The fluid level should be between the MIN and MAX marks on the side of the fluid dipstick marked +80°C. Top up as necessary with Dexron II type fluid through the dipstick pipe. The distance between the marks corresponds to about 0.4 litres. | 5. | In low ambient temperatures (colder than ± 0°C) it will not be possible to reach +80°C, so the fluid level should be read on the side of the dipstick marked +20°C. | Important Note | Change the fluid if it has a burnt smell or is black. |