WIS Document: 5294

| | Wiring diagram, ABS 5.3 (I) | Component list | 22a | Fuse board in main fuse box, dashboard | 29 | Brake light switch, on brake pedal | 47q | ABS Warning lamp in main instrument | 111 | Electronic speedometer | 342a | Fuse board in main fuse box, engine bay | 430 | TRIONIC control module, on right-hand side behind the side trim below the A-pillar | 445 | Data Link Connector, 16 pole, CARB | 505 | MOTRONIC control module M2.10.3, on right-hand side behind the side trim below the A pillar | 507 | Electronic control module TCS V6 | 508 | Control module, Cruise Control, at far right in engine bay below the windscreen. | 509 | Saab Sensonic control module, on the bulkhead partition behind the glove box | 510 | MOTRONIC control module M2.8.1, on right-hand side behind the side trim below the A pillar | 540a | Main instrument unit, low specification | 540b | Main instrument unit, high specification | 547 | ABS control module integrated in hydraulic brake unit between the battery and the front main fuse box. | 586 | Motronic electronic control module 4.1 OBDII | 587 | Motronic electronic control module 5.2 OBDII | 589 | Electronic control module, Saab Trionic OBDII | H6-7 | 6 pole connectors | H10-2 | 10-pin connectors below the left A-pillar | H16-1 | Data link connector under the fascia by the steering column | H33-2 | Black 33-pin connector, on the bracket below the left-hand A-pillar | H33-4 | 33-pin connector, on the bulkhead partition behind the glove box | G30 | Grounding point, left-hand structural member behind the battery | G33S | Signal ground connector bracket, below the left-hand A pillar on the connector bracket | J4 | Crimp (LHD):Approx. 450 mm from the rheostat towards the main instrument unit (RHD):Approx. 240 mm from the rheostat towards the main instrument unit | J18 | Crimp (LHD):Approx. 145 mm from the connector H33-2 (RHD):Approx. 170 mm from the connector H33-2 towards grounding point G33 | J32 | Crimp (LHD):Approx. 210 mm from the brake light switch towards the rheostat (RHD):Approx. 60 mm from branching rheostat towards the ICE electronic control module (CONV):Approx. 150 mm from branching electrically heated rear window towards the luggage compartment | J33 | Crimp (LHD):Approx. 90 mm from the connector H33-3 (RHD):Approx. 450 mm from the connector H33-2 towards the SID | J49 | Crimp (LHD):Approx. 390 mm from the rheostat towards the left A-pillar connector bracket (RHD):Approx. 150 mm from SID branching point towards the main instrument unit | J96 | Crimp (LHD):Approx. 110 mm from ICE control module branching point towards the brake light switch (RHD):Approx. 290 mm from connector H33-4 towards grounding point G34 | J99 | Crimp (LHD):Approx. 270 mm from the grounding point G33 towards the ICE control module (RHD):Approx. 340 mm from connector H33-4 towards grounding point G34 | J152 | Crimp approx. 60 mm from the washer fluid pump branching point towards the main fuse box | J162 | Crimp approx. 250 mm from the ABS electronic control module