WIS Document: 5321
Model Context: 900 (1998)
| |
Brake caliper, rear
Each brake caliper consists of a hydraulic body divided into two halves that are
held together by a screw joint. Each half is supplied with a brake cylinder. At braking both
pistons press the brake pads against the brake disc. It is very important that the pistons are
fitted correctly after removal (see “Fitting rear brake piston”).
When the brake pedal is released the piston seals return the pistons to the brake off
position.
Canonical Workshop Redirect
For step-by-step instructions, interactive illustrations, and official wiring diagrams, refer to the human-optimized workshop page below.
Switch to Interactive WIS