WIS Document: 5338
Model Context: 900 (1998)
| |
Replacing pressure reducing valve.
|
Removal
| 1. |
Depress the brake pedal with a
brake clamp.
| 2. |
Lift the car and undo the brake pipe connections to the pressure reducing
valve.
| 3. |
Take away the clips and remove the pressure reducing valve.
|
Fitting
| 1. |
Fit the clip and connect the
brake pipes to the pressure reducing valve.
| 2. |
Lower the car slightly and remove the brake clamp.
| 3. |
Bleed the brake system.
| 4. |
Lower the car and check the brake
operation.
Canonical Workshop Redirect
For step-by-step instructions, interactive illustrations, and official wiring diagrams, refer to the human-optimized workshop page below.
Switch to Interactive WIS