WIS Document: 8574

| | Command menu READ ON/OFF | ISAT display | Function | TORQUE LIMITATION ON 0 V/ OFF 12 V | Input signal from automatic transmission control module. See "Measured values, ECM connections", pin 13 | DRIVE SIGNAL ON 12 V/ OFF 0 V | Input signal from automatic transmission control module. See "Measured values, ECM connections", pin 14 | BRAKE LIGHT SWITCH ON 12 V/ OFF 0 V | Input from brake light switch. See "Measured values, ECM connections", pin 15 | CRUISE CONTROL ON 0 V/ OFF 12 V | Input signal from cruise control ECM. See "Measured values, ECM connections", pin 36 | AC ON 12 V/ OFF 0 V | Input signal from ICE ECM via anti-freeze thermostat. See "Measured values, ECM connections", pin 59 | OXY SENSOR PREHEAT ON/ OFF | Internal Trionic status indicating whether the oxygen sensor preheating circuit is activated (=ON) | AC OUT ON 0 V/ OFF 12 V | Output to AC relay/compressor via pressure switch. See "Measured values, ECM connections", pin 54 | CHECK ENGINE LAMP ON 0 V/ OFF 12 V | Output to main instrument. See "Measured values, ECM connections", pin 32 | SHIFT UP LAMP ON 0 V/ OFF 12 V | Output to main instrument. See "Measured values, ECM connections", pin 55 | FUEL PUMP RELAY ON 0 V/ OFF 12 V | Output to fuel pump relay. See "Measured values, ECM connections", pin 56 | MAIN RELAY ON 0 V/ OFF 12 V | Output to main relay. See "Measured values, ECM connections", pin 31 | KNOCK REG. ACTIVE YES/NO | Internal Trionic status indicating whether ignition reduction takes place on the basis of knock regulation | IDLING YES/NO | Internal Trionic status indicating whether idling exists