WIS Document: 8575

| | Command menu ACTIVATE | ISAT display | Function | INJECTORS | This command has a submenu as follows: • INJECTOR CYL 1 • INJECTOR CYL 2 • INJECTOR CYL 3 • INJECTOR CYL 4 The injector concerned is activated for 10 seconds at a frequency of 10Hz | IGNITION COILS | This command has a submenu as follows: • IGNITION COIL CYL 1 • IGNITION COIL CYL 2 • IGNITION COIL CYL 3 • IGNITION COIL CYL 4 The ignition coil concerned is activated for 10 seconds at a frequency of 200 Hz | SOLENOID VALVE | The BPC (APC) solenoid valve is activated for 10 seconds at a frequency of 90Hz | IAC VALVE | The idle air control (IAC) valve is activated for 10 seconds with a current of 0.6A | EVAP VALVE | The purge valve (EVAP valve) is activated for 10 seconds at a frequency of 8Hz | OXY SENSOR PREHEAT | The oxygen sensor preheater is activated for 10 seconds | AC RELAY | AC relay/compressor is activated for 10 seconds at a frequency of 1 Hz | Malfunction indicator lamp | The malfunction indicator lamp (CHECK ENGINE) is activated for 10 seconds at a frequency of 1Hz | SHIFT-UP LAMP | The SHIFT UP lamp is activated for 10 seconds at a frequency of 1Hz | FUEL PUMP RELAY | The fuel pump relay is activated for 10 seconds at a frequency of 1Hz | MAIN RELAY | The main relay is activated for 10 seconds at a frequency of 1Hz | IDLING ADAPTATION | This command is used in the forced adaptation of the throttle position during idling | RESET BOOST PRESSURE | This command is used for resetting boost pressure adaptation