WIS Document: 9655
Model Context: 900 (1995)
| |
Headlamp wipers
The headlamp wipers and washer motor can only be started when the ignition
switch is in the Drive position.
| 1. |
Check that fuses 31 and 10 are
intact and supplied with current.
| 2. |
Check that current is present on pin 6 of the stalk switch and on the connections
of the wiper motors.
| 3. |
Move the stalk switch towards the steering wheel rim and check that current is
supplied to the wiper motors and the washer motor.
| 4. |
Check the connectors, wiring and ground connections.
Canonical Workshop Redirect
For step-by-step instructions, interactive illustrations, and official wiring diagrams, refer to the human-optimized workshop page below.
Switch to Interactive WIS